The use of heat air gun.

1. Roofing work

In the construction or repair of the roof, it is necessary to weld a large amount of plastic film, waterproofing membrane, and some special parts of the details of the welding, such as pitched roof, the edge of the railing wall, dome skylight, etc. need to use the hot air gun. As the roof is affected by hot and cold temperature difference and precipitation, the quality of welding will directly affect the service life of the roof. Roof plastic film welding, dome skylight detailing, pitched roof plastic sealing waterproofing membrane, modified bitumen welding.

2. Automotive film/interior trim/repair

The rapid development of the automotive industry has led to a much higher demand for car trim and maintenance. Personalized film, paint has been leather seats require the use of hot air guns. Some thermoplastic parts in automobiles can be repaired without a hot air gun. Automotive lamination, paint and varnish removal and adhesive activation, stretching/smoothing interiors (e.g. leather, faux leather and plastic wraps), repairing automotive plastic parts. 3.
3. Floor Covering/Interior Decoration
Good flooring for the more sensitive in terms of hygiene hospitals, schools, airports and public buildings and other areas are vital. Most of such areas need to be covered with plastic flooring must also be welded with high quality. The quality of the plastic flooring welding also directly affects the humidity, cleanliness and flatness of the room.
4. Welding of tank/sink/tank structures
There are many bends and narrow parts in fuel tanks, sinks and some tank structures, and the performance of the hot air gun is tested in these parts. The gun must be small and powerful, and have a corner adapter to weld narrow areas.
5. Technical textiles and tarpaulins
The maneuverability, lightness and safety of the hot air gun come into full play when welding more complex detail structures such as outdoor print advertising and industrial tarps. The overlapping welding of truck tarpaulins and deburring of plastic parts can also be achieved with a hot air gun.

Precautions for the use of the heat air gun.

1. Do not use the hot air gun with chemical (plastic) type scrapers.
2. Please remove the dry paint from the nozzle or scraper after use to avoid fire.
3. Please use it in a well-ventilated place because the residue removed from the paint of lead products is toxic.
4. Do not use the hot air gun as a hair dryer.
5. Do not direct the hot air at people or animals.
6. When the heat air gun is in use or just after use, do not touch the nozzle heat air gun handle must be kept dry, clean and away from oil or gas.

7. Heat air gun should be completely cooled before storage.

VIDO is a manufacturer of professional tools, a variety of products, including chainsaws, hot air guns, etc.. The products are exported overseas and have been well received by everyone. If you are interested in professional tools, you are welcome to contact our company.